Welcome to Surrey Design and Build
Surrey's Premier Installer of Folding Doors
Situated in Surrey, we offer many years experience in the concept design and installation of Bespoke Conservatories, Folding Doors, Aluminium Folding Doors, Guttering, Doors, Windows, Fascias & Soffits and Conservatory Roofs & Lanterns
All products supplied come with the above accreditation
Conservatory Roofs
We will advise you on the optimum choice of roof material to suit the style and aspect of your conservatory.
As this is an important aesthetic and performance based decision some further information is detailed below;
- Ultraframe 25mm polycarbonate in clear, bronze, opal or combination. Although generally the most cost effective option these roofs are opaque and though offering greater privacy in situations where neighbours may overlook, they would not suit the star gazer!
- Pilkington 'K' Glass or equivalent. Normally the recommended roof material this offers better sound and heat insulation, is easier to keep clean and will enhance the appearance of your conservatory.
- K2 Performance Glass. In south facing conservatories K2 Glass is recommended for the roof, and in some cases, the side windows. This will greatly reduce heat and glare from the sun and often saves the cost of expensive blinds. K2 has a special easyclean coating to repel dirt and stains. Please ask for a demonstration.
- Vents are recommended in all south-facing roofs.
Rooflights and Skylights
Overview
Modulised standard/bespoke rooflights for flat roof and pitched roof window applications. Flushglazed flat rooflights and pyramid rooflights. Opening vents for ventilation, daylight, roof access, and rooflight escape. Sliding rooflights and opening skylights, retractable roofs for terrace access and roof open air living. Stock glass rooflights, fire rated glass, walk on glass, electric rooflight and manual skylight options.
Flush Glaze
The Flushglaze fixed flat glass skylight can be tailored to meet many shapes and sizes from square, rectangular, triangular and a recently completed tear drop shaped Glazing Vision will identify and design the rooflight to meet your needs. The Flushglaze is a very low profile system based on car windscreen technology, the glass being structurally bonded and triple sealed making it ideal for flat roof applications on a pitch of only 3-5 degrees. This reduces water ponding and condensation risks to a minimum by the elimination of internal flashings and metal framework and can be installed on flat or sloped roof applications. The rooflight can be extended to any length like ribbon glazing by linking sections either with glass to glass silicone seals, back to back angles or glass fins.
Options
- Walk-on specification
- Special colours
- Solar control and obscure finishes
- Extended size range
- Wall abutment
- Ridge and Eaves applications
- Fire Rated Flushglaze available
Ridgeglaze
One of the most appealing rooflights we manufacture using the Flushglaze profile is the Ridge Glaze Roof light, a fixed glass rooflight. Again Glazing Vision was looking to introduce a dual pitched rooflight which would allow more daylight into the building and remove the need for internal framework to support the rooflight. The use of steped edge glass allows us to use silicone sealed glass to glass joins to create a complete flush finish and joins.
Options
- Special colours
- Solar control and obscure finishes
- Extended size range
PYRAMID SKYLIGHTS
A 45 degree frameless glass Pyramid rooflight with manual/electric hinged opening or fixed variants. The clarity and longevity of glass ensures fantastic light transmission throughout the life of the building, typically 50% more than plastics over its life cycle. The shape of the Skyline gives an excellent concentration of light and self cleaning characteristics with a stylish frameless design. Available in square or elongated configurations.
Features
- Maximum daylight - no framework
- Frameless self-clean flushglaze design
- High Thermal Performance
- Guaranteed long life clarity (subject to 3 month cleaning intervals)
- Heavy duty construction
- Installation simplicity
- Downlighter as standard only on square fixed pyramids
Skydoor
The traditional Skydoor Hydraulic Hinged skylight can be supplied with a single or double leaf, either as a stand alone unit on a flat or sloping roof. The hydraulic actuation system needs to be used on any hinged rooflight above 3 square metres, and can open to 90 degrees for access. A manual override operation can be interated into the rooflight making it ideal for a Succah rooflight. A high performance safety glass is flush fixed and factory bonded wherever possible, giving a clean flush all-glass appearance to the outside, hence its suitability for low pitch and flat roof applications. Often specified for ambience and access where a full opening is required and no roof parking space is available for a sliding rooflight option. For roof terrace access applications the hinged panels can also act as safety balustrades in the fully open position.
Features
- Maximum daylight - minimum framework
- Flush glass appearance to outside
- Heavy duty construction
- Thermally enhanced framework design
- Concealed operating mechanism
Options
- Single or double leaf
- Ventilation only or fully opening access
- Choice of colours/finishes
- Manual or remote operation
- Electric or hydraulic actuation
- Electronic remote control
- Rain/climatic/safety sensors
- Proximity detection
